Press
the DST (Daylight Savings Time) key if appropriate.
Press
the up or down arrow keys (underneath TIME on main keyboard)
Press
the key labeled DAY to set the day of the week.
After
you have set the time and the day press RUN PROGRAM.
Programming
the WAKE Program
Press
the key labeled WAKE to access the program mode.
Press
the up or down arrow keys (underneath TIME on main keyboard) to set
the desired time, and the up or down arrow keys (at top right of thermostat)
to set the desired temperature.
Programming
the LEAVE Program
Press
the key labeled LEAVE to access the program mode.
Press
the up or down arrow keys (underneath TIME on main keyboard) to set
the desired time, and the up or down arrow keys (at top right of thermostat)
to set the desired temperature.
Programming
the RETURN Program
Press
the key labeled RETURN to access the program mode.
Press
the up or down arrow keys (underneath TIME on main keyboard) to set
the desired time, and the up or down arrow keys (at top right of thermostat)
to set the desired temperature.
Programming
the SLEEP Program
Press
the key labeled SLEEP to access the program mode.
Press
the up or down arrow keys (underneath TIME on main keyboard) to set
the desired time, and the up or down arrow keys (at top right of thermostat)
to set the desired temperature.
Using
the COPY function
When
finished entering a program for a day, push the COPY button one time;
the word Copy will come on the screen.
Then
push the DAY button until the day you wish to copy to is shown on
the screen.
Push
the COPY button once again, and the word Done will appear on the screen.
Repeat
steps 1-3 for all of the days you wish to copy.
Clearing
a Program
To clear
a program, go to the day and period you wish to cancel by pressing
the DAY and period (LEAVE, RETURN, or SLEEP) keys.
Then
press and hold the period key (LEAVE, RETURN, or SLEEP) for approximately
3 seconds so that the time and temperature disappear and the program
is cleared.
Note: The
WAKE period cannot be cleared.
Hold
Temp
Press
HOLD TEMP.
Pressing
HOLD TEMP will cause the thermostat to control at the present setpoint
temperature. The HOLD temperature setpoint can be modified with the
UP ARROW/DOWN ARROW keys. The display will show HOLD, whether the
system is in the heating mode, or cooling mode, the current temperature
and if the thermostat is calling for heating/cooling.
Pressing
the RUN PROGRAM key will bring the thermostat back to the scheduled
program operation and cancel the HOLD setpoints.
If the
user presses HOLD TEMP again the user will be in the Vacation Hold.
The Vacation
Hold is the number of days the user wants to maintain a certain temperature.
At the end of this time period, the thermostat will revert back to the
programmed times and temperatures. A temperature can be maintained for
a maximum of 255 days.
Press
the TIME UP/DOWN keys to change the number of days to hold a certain
temperature.
Pressing
the TEMPERATURE UP ARROW/DOWN ARROW keys will set the desired temperature
to hold.
Press
period key to select the period to start when Vacation Hold ends.(
i.e. MORNING, DAYTIME, EVENING, NIGHT)
The
number of days, day of week hold ends, hold for heat or cool and the
current room temperature will be displayed.
The
RUN PROGRAM key may be pressed to exit the timed HOLD mode at anytime
Courtesy of Honeywell. For more information on Honeywell products, visit their website at: honeywell.com/myhome
Hannabery HVAC is a member of the Independent Quality Alliance, (IQA) "Service Professionals Committed To Excellence"
